To Next PageTo Next PageWhat to do if my Bose Speaker System has distorted sound?
First, power off your amplifier or receiver. Then, carefully inspect all connections between the speakers, the Acoustimass module, and the amplifier or receiver to ensure they are secure.
How to troubleshoot distorted sound on Bose Speaker System?
Disconnect the amplifier or receiver from your Bose Speaker System. Reconnect the Acoustimass module to a different amplifier or receiver that you know is functioning correctly. If the system then operates as expected, the issue lies with your original amplifier or receiver.
What to do if my Bose Acoustimass 5 V has distorted or no sound?
If your Bose Speaker System has distorted or no sound, try the following: * Disconnect the amplifier or receiver from the system, and reconnect the Acoustimass® module to another amplifier or receiver that is working properly. If the system now works, the problem is in your amplifier or receiver. * Power off the amplifier or receiver and check all the connections between the speakers, the module, and amplifier or receiver. * Refer to your amplifier or receiver’s owner’s guide for more troubleshooting information. * See “Checking your receiver or amplifier’s speaker channels”.
What to do if my Bose Acoustimass 5 V Speaker System amplifier or receiver’s speaker channel may be defective?
If one of the speakers does not play or sounds distorted, your amplifier or receiver’s speaker channel may be defective. Set the amplifier or receiver’s balance control all the way to the right and power it on. If the left speaker now plays properly, your amplifier or receiver’s left speaker channel may be defective. Repeat to check your right speaker, reconnecting the cable from the module’s R INPUTS to the amplifier or receiver’s left speaker terminals. DO NOT connect the other speaker to the potentially defective channel. If the channel is defective, it could damage your Acoustimass system.
General| Brand | Bose |
|---|---|
| Model | Acoustimass 5 series V |
| Category | Speaker System |
| Language | English |
Recommendations for placing the Acoustimass module and speakers for optimal performance and safety.
Step-by-step guide to connecting the satellite speakers to the Acoustimass module.
Instructions for wiring the Acoustimass module to the audio system.
Crucial checks to prevent short circuits and damage before powering on.
Steps to verify correct system operation after connections are made.
Solutions for common problems like distorted or no sound.
