English • 3Installation Guide • DesignMax DM2S
PRO.BOSE.COM
Overview
Package Contents
Product Dimensions
× 2 × 2 × 2
146 mm
5.75 in
73 mm
2.87 in
Ø 5.5 mm
0.22 in
113 mm
4.45 in
124 mm
4.88 in
116 mm
4.57 in
128 mm
5.04 in
182 mm
7.17 in
Technical Specifications
For additional specifications, see the DesignMax DM2S technical
data sheet at PRO.BOSE.COM.
Physical
Product Dimensions Height: 182 mm (7.17 in)
Width: 113 mm (4.45 in)
Depth: 116 mm (4.57 in)
Net Weight, Loudspeaker with
grille (single)
1.32 kg (2.9 lb)
Shipping Weight (pair) 3.94 kg (8.7 lb)
Important Installation Information
It is the installer’s responsibility to ensure installation of
the loudspeakers and mounting system is performed in
accordance with all applicable codes, including local
building codes and regulations. Consult the local authority
having jurisdiction before installing this product.
It is the responsibility of the installer to ensure the safety
of the loudspeaker installation. Failure to properly install
the loudspeaker could result in damage, injury, or death.
Do not mount the product in locations where
condensation may occur.
The hardware for securing the loudspeaker to the
mounting surface is not supplied. Consult a building
professional for the proper mounting hardware before
installing the loudspeaker.
Do not mount on surfaces that are not sturdy, or that
have hazards concealed behind them, such as electrical
wiring or plumbing. If you are not sure about installing the
bracket, contact a qualified professional installer. Ensure
the bracket is installed according to local building codes.
Do not use hydrocarbon based solvents, lubricants or
cleaning agents of any type on or around this loudspeaker
and associated mounting hardware during installation.
Exposure to such substances can lead to degradation of
the plastic material, resulting in cracking and creating a
falling hazard.
To Next Page
Loading...
Need help?
General