Setting up a second listening zone
Your LIFESTYLE® home entertainment system can direct sound from one
or
two
sound
sources (such as CD,
AM/FM
tuner, TAPE,
or
AUX)
to
two
different listening zones at the
same time.
What is a
zone?
Each listening area, whether a room
or
a group
of
rooms>(including
outdoor
areas), is called a
zone. Your primary listening area is set
up
as zone 1.
What do I
need
for
setting up a second
zone?
• A
Bose®
powered speaker system that is compatible with your home entertainment system.
An existing stereo system can also be connected (special adapter required).
• The appropriate LIFESTYLE® system cable
to
connect
the zone 2 speaker system
to
the
SPEAKER ZONES 2
connector
on the rear panel
of
the media center.
• A second LIFESTYLE® system remote control
to
operate the zone 2 sound.
See your dealer
or
contact
Bose
for
information on obtaining additional powered speakers,
remote controls, cables, and adapters
for
connecting additional equipment.
How
do I
set
up a
speaker
system in a second
zone?
1. Choose a location
for
the speaker system
in
zone
2.
2. Connect the audio input cable from the zone 2 system
to
the SPEAKER ZONES 2
output
on the rear panel
of
the media center.
3.
When
power
is connected and you are ready
to
set
up
your second remote control, see
"Setting
up
a second listening zone"
in
your
LIFESTYLE®
system operating guide.
Left
channel
Right channel
~~:::::(II]"
••
Control
Zone 2 stereo adapter kit cable
(Mini-DIN connector is marked "FIX")
Note: Before using
your zone
2 speak-
ers, you
may
need
to
change the
{{Zone
2
Protocol" setting for
the zone
2 speakers
you are using. See
({Changing the System
Setup"
in
your operat-
ing guide.
) Note: For zone
2,
use only cables that have a mini-DIN connector marked
"FIX".
Cables
marked "VAR" should not
be
used, unless specified
in
the owner's guide for the product.
Media center-to-zone 2
connections
Figure
21
23
To Next Page
Loading...
