10 - English
D. Insert one end of the audio input cable into the Audio OUT connector on the
control console. Make sure the flat surface with the arrow on the plug faces
up.
You will be asked to connect the other end of the cable while setting up the
contents of the next box.
Audio OUT
E. Insert the power supply output cord into the control console Power connector.
Power
Power supply
output cord
F. Remove a power cord from the power cord box.
G. Insert one end of the power cord into the power supply. Make sure you push
the plug in as far as it can go.
H. Plug the other end of the power cord into a live AC (mains) power outlet.
I. Continue with Box
To Next Page
Loading...
