12
English
Using an S-Video TV Connection
Connecting the VS-2 S-Video output to your
TV
You can use the S-Video cable included with your LIFESTYLE
®
system to
make this connection.
To connect your TV to the VS-2 using an S-Video cable, do the following:
1. Plug one end of the S-Video cable into the S-Video connector on the rear
of your TV.
2. Plug the other end of the S-Video cable into the Video OUTPUT S-Video
connector on the VS-2.
3. Go to page 13 for instructions on connecting other A/V devices to the VS-2.
TV
VS-2
00_LasikOG.book Page 12 Thursday, October 26, 2006 1:23 PM
To Next Page
Loading...