8
English
Using an HDMI TV Connection
Connecting the VS-2 HDMI output to your TV
To connect your TV to the VS-2 using the supplied HDMI cable, do the following:
1. Plug one end of the HDMI cable into the HDMI connector on the rear of your
TV.
2. Plug the other end of the HDMI cable into the Video OUTPUT HDMI connector
on the VS-2.
3. Go to page 9 for instructions on connecting other A/V devices to the VS-2.
TV
VS-2
00_LasikOG.book Page 8 Thursday, October 26, 2006 1:23 PM
To Next Page
Loading...