TROUBLESHOOTING
51
|
ENG
REBOOT THE HEADPHONES
If the headphones are unresponsive, you can reboot them. Rebooting the headphones
doesn’t clear settings or connected devices.
NOTE: Do not connect the USB cable to the headphones until instructed to do so.
1. Disconnect all cables from the headphones.
2. Connect one end of the USB cable to a USB-A wall charger or computer that is
powered on.
3. Press and hold the Power/Bluetooth button while connecting the small end of the
USB cable into the USB-C port on the right earcup.
4. Release the Power/Bluetooth button when the Bluetooth light blinks blue.
To Next Page
Loading...
