SECURE FIT
17
|
ENG
CHANGE THE STAYHEAR+ SLEEP TIPS
1. Holding the base of the attached StayHear+ Sleep tip, peel the tip back and gently
slide the sleepbud™ out of the tip.
2. Align the raised line near the opening of the new StayHear+ Sleep tip with the
groove on the nozzle on the sleepbud™. Slide the nozzle into the opening. Then,
gently stretch the base of the tip around the back of the sleepbud™ to hold the
sleepbud™ in place.
Sleepbuds™ nozzle
Opening
NOTE: Make sure to insert the left sleepbud™ into the left tip and the right
sleepbud™ into the right tip (see page 15).
3. Make sure that the sleepbud™ is correctly oriented in the tip. The Bose logo on the
sleepbud™ should face outwards and be right-side up, and both charging contacts
should be visible through the back of the tip.
To Next Page
Loading...
Need help?
General