EasyManuals Logo

Bose Noise-Masking Sleepbuds User Manual

Bose Noise-Masking Sleepbuds
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
BATTERY
20
|
ENG
CHARGE THE CASE
The charging case stores and charges your sleepbuds™ while you’re not using them.
NOTES: 
Keep the case connected to AC (mains) power when possible to make sure that
your sleepbuds™ are always fully charged. You can also use the case battery to
charge the sleepbuds™ while traveling.
Before charging, make sure the sleepbuds™ are at room temperature, between
41° F (5° C) and 113° F (45° C).
1. Connect the small end of the USB cable to the USB connector on the back of
the case.
2. Connect the other end to the USB power supply.
3. Plug the USB power supply into an AC (mains) outlet.
NOTE: If necessary, attach the AC power adapter for your region.
Charging time
When the sleepbuds™ are outside the case, allow up to three hours to fully charge the
case. When the sleepbuds™ are inside the case, charging time varies.
NOTE: When the case is fully charged and operating on battery power, you can fully
charge the sleepbuds™ once. A single charge of the sleepbuds™ allows up to
16 hours of use.

Other manuals for Bose Noise-Masking Sleepbuds

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bose Noise-Masking Sleepbuds and is the answer not in the manual?

Bose Noise-Masking Sleepbuds Specifications

General IconGeneral
BrandBose
ModelNoise-Masking Sleepbuds
CategoryPersonal Care Products
LanguageEnglish