Insert the AA batteries (2)
into the control module.
A. Place the headset on your head.
B. Adjust the headband so the side
pads rest above your ears.
On the control module, press the Power button I.
NOTE: For Dual plug only. For 5-pin XLR, 6-pin
Lemo, and 7-pin XLR, the headset powers
on automatically when connected to
aircraft power.
Insert the aircraft connector into the
aircraft control panel.
A. Locate the left T and right U icons
on the headband to orient the
headset properly.
B. Rotate the side pads into position.
5-pin XLR
6-pin Lemo
7-pin XLR
Microphone
Intercom/audio
Dual plug
a ba b c
e f g
To Next Page
Loading...
