Why does my Boss Audio Systems Car Receiver have a poor effect on receiving a station?
Poor reception on your Boss Audio Systems Car Receiver can stem from a few issues: * The antenna may not be fully extended or properly grounded, make sure the antenna is fully extended and properly grounded at its mounting location. Replace the antenna if it's broken. * The broadcasting signal might be weak.
What to do if Boss Audio Systems Car Receiver stops responding or shows error in display?
If your Boss Audio Systems Car Receiver stops responding or displays an error, press the RESET button.
Power| operating power | 12 Volts DC |
|---|---|
| wattage | 80w x 4 |
| fuses | 10 amp |
FM Tuner| tuning range | 87.5 - 107.9MHz |
|---|---|
| FM sensitivity | 12dBu |
| stereo separation at 1 Khz | 35dB |
AM Tuner| tuning range | 530-1710 KHz |
|---|---|
| am sensitivity | 30dBu |
Weight and Dimensions| dimensions | 178mm(W) x 78mm(D) x 51mm (H) |
|---|---|
| weight | 0.8 Kg |
Covers initial warnings, warranty validation, and professional installation requirements.
Details on safe installation practices including battery, speaker wiring, and power connections.
Guidelines for securing wiring, preventing short circuits, heat buildup, and electrical noise.
Instructions for proper fuse replacement and verifying all connections before operation.
Lists required tools, pre-installation checks, and steps to remove the old unit.
Detailed steps for marking speaker wire polarity to ensure correct connections.
Instructions and diagrams for installing the unit using the DIN front mount method.
Guidance for installing the unit using the DIN rear mount method, utilizing vehicle bracket holes.
Details on connecting ground, memory backup, and remote control wires for proper function.
Explanation of connector pin assignments and the parking wire connection for video display.
Notes on speaker impedance, avoiding bridging, and correct negative terminal connections.
Instructions for turning the unit on/off, selecting playback modes, and adjusting volume.
Details on adjusting Bass, Treble, Balance, Fader, EQ, Beep, and Loudness settings.
How to use the HOME button, access setup menus, and view the clock.
Guide to choosing radio bands (FM/AM) and using seek/manual tuning functions.
Instructions for automatic storing, scanning saved stations, and saving custom presets.
Features for improving reception (Mono/Stereo, Local/Distance) and RDS-EON introduction.
Details on AF, TA, and PTY functions for traffic announcements and program type selection.
Instructions for navigating tracks, playing, pausing, and switching media types.
How to view file lists, select files, and adjust video aspect ratio during playback.
Step-by-step guide for pairing a mobile phone with the unit, including passkey usage.
Information on automatic reconnection and managing incoming calls via Bluetooth.
How to stream music from a mobile phone or PMP using the A2DP profile.
Details on using the AUX input jack and the RCA output for external audio components.
Explanation of how to switch the display off to enable video output to a monitor.
Guidelines on how to clean the unit using a dry cloth without liquids.
Instructions for replacing fuses with the correct amperage rating to avoid damage.
A comprehensive list of buttons on the remote control and their respective functions.
Instructions for installing the battery and tips for operating the remote control effectively.
Solutions for problems like 'No Power' or when the unit stops responding.
Guidance for issues related to unable to receive stations or poor reception.
Details on operating power, wattage, output wiring, impedance, dimensions, and weight.
Technical data for FM and AM tuning ranges, sensitivity, and stereo separation.
To Next Page