Boss Audio Systems ELITE ELPC40B User Manual

OPTIONAL
To remove the distance guide lines:
1. Turn the system OFF before proceeding
2. Cut the white loop wire located at the connection points
(camera end).
3. Insulate the wire, using tape or crimp connectors on both ends.
4. Reconnecting the wire will display the guide lines again.
To invert the camera image:
1. Turn the system OFF before proceeding
2. Cut the blue loop wire located at the connection points (camera end)
3. Insulate the wire, using tape or crimp connectors on both ends.
4. Reconnecting the wire will orient the image back to its original position.

Boss Audio Systems ELITE ELPC40B Specifications

General

Digital Display	Yes
Capacitance	4 Farad
Surge Voltage	24 Volts
Touchscreen	No
Bluetooth	No
USB Port	No
AUX Input	No
AM/FM Radio	No
Video Playback	No

Summary

Specifications

Power Supply

Specifies the power requirement for the device.

Lens Angle

Indicates the field of view of the camera lens in degrees.

TV System

Details the television system standard used by the camera.

Video Output

Describes the video signal output characteristics.

S/N Ratio

Specifies the signal-to-noise ratio, indicating video clarity.

IP Rating

Details the Ingress Protection rating for dust and water resistance.

Operating Temperature

Specifies the operational temperature range in Celsius.

White Balance

Indicates the automatic adjustment for color temperature.

Minimum Illumination

Specifies the minimum light level required for operation.

AGC

Details the Automatic Gain Control setting.

Resolution

Indicates the video resolution in TV lines.

Electronic Shutter

Specifies the electronic shutter speed setting.

Effective Pixels

Details the number of effective pixels in the camera sensor.

Installation

Wire Connection

Instructions for connecting the camera's power and video cables.

Camera Installation

Guidance on mounting the camera using the license plate frame.

Optional Guide Lines

Procedure to remove or display distance guide lines on the video output.

Troubleshooting Guide

No Image

Solutions for when the camera display shows no image.

Image Blurring

Troubleshooting steps for blurry video output.

Image Shaking

Guidance to resolve issues with unstable video feed.

Image Slanted

Steps to correct a tilted or slanted camera image.