MRC10
Installation Instructions
Marine Radio Cover
Thank you for purchasing a BOSS Audio Systems product. Please read through
these instructions carefully so you will know how to install this product properly.
Package Contents
• 1x Marine radio cover
• 4x Mounting screws and clip nuts
• Installation Instructions and warranty
Introduction and Features
• Mounting cut-out in the dash (W x H): 8.7” x 3.3” ( 220 x 83 mm)
• Fits single DIN head units (W x H): 7” x 2.0” (178 x 51 mm)
• Marine radio cover dimensions (W x H x D): 10” x 4.1 x 2.6” (249 x 105 x 67 mm)
• Push button activates auto-slide lens cover (spring activated door)
• UV-stabilized ABS plastic housing
• Impact-resistant ABS
• Sealed with an EVA gasket
Product Overview
Push-to-open button
Spring activated ip-up door
Tab to cover
screw holes
Tab to cover
screw holes
To Next Page
Need help?
General
