Boss Audio Systems RPD-10 User Manual

Controls the unit's power and effect status, including indicator lights.

Adjusts delay time range, fine-tuning, and sound tone for the effect.

Manages delay repeats and output volume for delay or chorus sound.

Connects audio sources and selects input signal level for optimal performance.

Provides monaural and stereo outputs for sound routing to external devices.

Connects footswitches for remote effect control and the Hold function.

Manages direct sound cancellation and connections for power supply.

Details connections for power supply and optional footswitches.

Illustrates connecting instruments, mixers, and amplifiers for signal flow.

Instructions for configuring controls for delay and chorus modes.

Details using footswitches for effect control and Hold function.

Guidelines for using specific AC adaptors and power supplies.

Procedure for mounting the unit in a standard 19-inch rack.

Details input/output levels, impedances, and load impedance.

Information on the sampling system and the unit's frequency response.

Lists available controls, switches, and status indicators.

Specifications for power requirements, physical dimensions, and included accessories.

Lists optional accessories compatible with the unit.