BLUETOOTH OPERATION
7
Pair and Connect
Pair the mobile phone with the device before using it.
1. In any mode, prior to pairing and connecting, the BT logo in the LCD indicating that no device is
connected. To begin pairing, enable BT mode on your mobile phone.
2. When the phone finds the car audio system, the “BOSS AUDIO 616UAB” name will be displayed.
3. Choose the “BOSS AUDIO 616UAB” from the device list to pair and connect with the car audio
system. Upon confirming, the BT logo will stop flashing.
4. When pairing is complete, the mobile phone audio will automatically transfer to the car
audio system whenever a call is made or received, or when the mobile phone plays music.
Make a Call
• To make a call, dial the call directly from the paired mobile phone.
• To make a call with this bluetooth handsfree system:
a) When linking up the Bluetooth-enabled mobile phone to this bluetooth handsfree system, press the
button to access the dial telephone number mode, then press the “0~9”, * and # button on remote
control to input the telephone number, and the entered number will be shown on the LCD display.
b) If a number has been incorrectly inputted, press the DEL button or button to delete it.
c) Press the button to make outgoing call.
Redial Last Dialed Number
Press and hold the button on the control panel to redial the last dialed phone number.
Answer a Call
• When the mobile phone is called, the incoming telephone number displays on the LCD.
• To receive the call, press the button on the front panel or remote control.
Reject or End a Call
To reject or end the call, press the button on the front panel or remote control.
Switch Audio Between Car Audio and mobile Phone
During a call, press the VOL knob/button to switch the audio source from the car audio system back to
your mobile phone.
Adjust Call Volume
During a call, use VOL knob or VOL+ /VOL- button to adjust the call volume level.
Audio Streaming (A2DP)
1. Press the SRC button to enter BT mode and the “BT AUDIO” shown on the LCD display.
2. When a mobile device is paired, music played through that device will automatically be heard through
the car audio system.
3. Press the or button to play the next or previous on the mobile phone.
4. Press the button to pause or resume music playback.
Push-To-Talk
This Push-To-Talk feature allows direct access to Android and IOS smartphones voice assistant capability
when user establish the bluetooth connection between user’s smartphone and this receiver.
Simply connect directly from this receiver via Bluetooth with button (VOL knob).
Note:
• Before using the Push-To-Talk, user must enable the mobile data on user’s smartphone.
• To use the navigation feature, switch to the BT Audio source to hear voice commands over your
vehicles speakers.
To Next Page
Loading...
