Boss BPS242RF - User Manual

BPS242RF
T
T
T
LCD Display
Time setting position
First switch on time
First switch off time
Second switch on time
Second switch off time
Comfort temperature setting
Setback temperature setting
Run position
Programming slider
Rotary
Dial
Operating
Mode Slider
Guide to symbols
On LCD Display
Actual room temperature in °C
The unit is controlling to the selected comfort temperature setpoint
The unit is controlling to the selected setback temperature setpoint
The unit is controlling to the standby temperature setpoint
Indicates when the temperature setpoint has been moved from setpoint by user. This setpoint
will operate until the next switching time. This is only active when the controller is in the run
and automatic mode
Automatic mode. The unit is controlling to the time and temperature programmes that have
been selected
Permanent comfort mode. The unit is controlling continuously to the comfort temperature
setpoint.
Permanent setback mode. The unit is controlling continuously to the setback temperature
setpoint.
Permanent standby mode. The unit is controlling continuously to the standby temperature
setpoint.
Indicates there is a call for heat
Indication of low battery life, this signifies batteries must be replaced
Guide to symbols
on Operating Mode Slider
Automatic mode. The unit is controlling to the time and temperature programmes that have
been selected
Permanent comfort mode. The unit is controlling continuously to the comfort temperature
setpoint.
Permanent setback mode. The unit is controlling continuously to the setback temperature
setpoint.
Permanent standby mode. The unit is controlling continuously to the standby temperature
setpoint. This setpoint is fixed at 5°C
Programming and operating Instructions for the BOSS BPS242RF
Programmable Room Thermostat
Introduction.
This leaflet gives you easy to follow instructions on how to set up your BPS242RF programmable room
thermostat.
Contents
How do I set the time?
How do I set the switch on & off times?
How do I set the comfort temperature value?
How do I set the setback temperature value?
How do I temporarily change the current setpoint?
What does the Advance button do?
Technical Helpline: 0870 850 0184
Advance button
Batteries Compartment

Summary

Introduction to BOSS BPS242 RF Thermostat

Setting the Time

Setting On & Off Times

Setting the First Switch On Time

Configure the first time the unit turns on, adjusting hour and minute with the rotary dial.

Setting the First Switch Off Time

Configure the first time the unit turns off, adjusting hour and minute with the rotary dial.

Setting the Second Switch On Time

Configure the second time the unit turns on, adjusting hour and minute with the rotary dial.

Setting the Second Switch Off Time

Configure the second time the unit turns off, adjusting hour and minute with the rotary dial.

Setting Temperature Values

Setting the Comfort Temperature

Set the desired comfort temperature, adjusting the value with the rotary dial.

Setting the Setback Temperature

Set the desired setback temperature, adjusting the value with the rotary dial.

Temporary Setpoint Change

Understanding the Advance Button

Boss BPS242RF Specifications

General

Control Type	Digital
Remote Control	Yes
Type	Programmable
Power Source	Battery
Mounting	Wall
Display	LCD
Battery Life	1 Year