Boss BX-8 - Page 13

@ IMPORTANT NOTES
Use the supplied AC Adaptor; ACE-120, 220 or
240. Using any other adaptor will cause trouble.
When the unit is not to be used for a long period of
time, disconnect the AC adaptor from the socket.
Avoid using this device in extreme heat, humidity
or where it may be affected by dust or vibration.
Use a mild detergent and soft cloth for cleaning. Do
not use solvents such as thinner.
lf this unit does not operate properly, unplug the
power cable immediately and contact your local
Roland service center.
Switch on to mixer first, then the power amplifier.
Switch off the power amplifier first, then the mixer.
In both cases, set all the Faders to zero.
For about a few seconds after the units is turned
on, it does not function because of the muting
circuit.
13