Need help?Do you have a question about the Boss CE-5 and is the answer not in the manual?
Essential safety steps for connecting and operating the unit to prevent damage.
Connection point for the BOSS AC adaptor, ensuring reliable operation without batteries.
Connects your instrument to the unit, automatically powering it on.
Wiring the guitar/instrument and amp to the CE-5 for mono or stereo operation.
Setting initial control values and adjusting effect parameters like rate, depth, and filters.
Details input/output impedance, residual noise, and power requirements.
Step-by-step guide for safely replacing the internal 9V battery.
Essential safety steps for connecting and operating the unit to prevent damage.
Connection point for the BOSS AC adaptor, ensuring reliable operation without batteries.
Connects your instrument to the unit, automatically powering it on.
Wiring the guitar/instrument and amp to the CE-5 for mono or stereo operation.
Setting initial control values and adjusting effect parameters like rate, depth, and filters.
Details input/output impedance, residual noise, and power requirements.
Step-by-step guide for safely replacing the internal 9V battery.
General| Effect Type | Chorus |
|---|---|
| Controls | Level, Rate, Depth, Filter |
| Input Impedance | 1 M ohm |
| Output Impedance | 1 k ohms |
| Recommended Load Impedance | 10 k ohm or greater |
| Connectors | Input, Output, AC Adaptor |
| Power Supply | DC 9V: Dry Battery 9 V type, AC Adaptor |
| Dimensions | 73 (W) x 129 (D) x 59 (H) mm |
| Weight | 400 g (including battery) |
To Next Page
