Need help?Do you have a question about the Boss Metal Core ML-2 and is the answer not in the manual?
This jack accepts the connection of an AC adaptor (optionally available BOSS PSA-series).
Explains the functions of the LEVEL, LOW, HIGH, and DIST knobs for sound shaping.
Step-by-step instructions for loosening the pedal, removing the old battery, and installing a new one.
Addresses issues where the unit does not power on or the CHECK indicator does not light.
Helps diagnose problems related to sound output or volume levels.
This jack accepts the connection of an AC adaptor (optionally available BOSS PSA-series).
Explains the functions of the LEVEL, LOW, HIGH, and DIST knobs for sound shaping.
Step-by-step instructions for loosening the pedal, removing the old battery, and installing a new one.
Addresses issues where the unit does not power on or the CHECK indicator does not light.
Helps diagnose problems related to sound output or volume levels.
General| Type | Distortion |
|---|---|
| Technology | Analog |
| Controls | Level, Tone, Distortion |
| Input Impedance | 1 M ohm |
| Output Impedance | 1 k ohm |
| Weight | 400 g |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Power Supply | 9V DC |
| Dimensions | 73 x 129 x 59 mm |
To Next Page
