Need help?Do you have a question about the Boss MZ-2 Digital metalizer and is the answer not in the manual?
Connects an AC adaptor for mains power operation.
Lights up when effect is on; also serves as battery check indicator.
Adjusts the volume of the effect sound.
Adjusts the tone of the effect sound, emphasizing or cutting high frequencies.
Adjusts the depth of the distortion effect.
Selects one of six different distortion effect modes.
Connect amplifiers to these jacks for stereo or dual output.
Connects electronic musical instruments like guitars.
Turns the effect on or off by pressing the pedal.
Connects an AC adaptor for mains power operation.
Lights up when effect is on; also serves as battery check indicator.
Adjusts the volume of the effect sound.
Adjusts the tone of the effect sound, emphasizing or cutting high frequencies.
Adjusts the depth of the distortion effect.
Selects one of six different distortion effect modes.
Connect amplifiers to these jacks for stereo or dual output.
Connects electronic musical instruments like guitars.
Turns the effect on or off by pressing the pedal.
General| Model | MZ-2 |
|---|---|
| Manufacturer | Boss |
| Technology | Digital |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Effects | Metalizer |
| Controls | Distortion |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Power Supply | 9V DC |
| Dimensions | 73 mm (W) x 129 mm (D) x 59 mm (H) |
To Next Page
