Need help?Do you have a question about the Boss MT-2 Metal Zone and is the answer not in the manual?
General| Effect Type | Distortion |
|---|---|
| Technology | Analog |
| Input Impedance | 1 M ohm |
| Output Impedance | 1 k ohm |
| Controls | Level, High, Low, Middle, Mid Freq |
| Power Supply | 9V DC |
| Dimensions | 73 mm (W) x 129 mm (D) x 59 mm (H) |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Connector Type | 1/4" |
| Battery | 9V |
| Current Draw | 20 mA (DC 9V) |
Adjusts the overall volume of the effect sound.
Controls the tone of higher frequencies in the sound.
Engages or disengages the effect pedal.
Adjusts the intensity of the distortion effect.
Boosts or cuts the selected middle frequency.
Sets the specific frequency to be adjusted in the middle range.
Setting the intensity of the distortion effect.
Fine-tuning the middle tone with level and frequency controls.
To Next Page
