Need help?Do you have a question about the Boss MD-2 and is the answer not in the manual?
General| Effect Type | Mega Distortion |
|---|---|
| Input | 1/4" phone jack |
| Output | 1/4" phone jack |
| Bypass | Buffered Bypass |
| Input Impedance | 1 M ohm |
| Output Impedance | 1 k ohm |
| Controls | Level, Tone, Distortion |
| Power Supply | 9V DC or 9V battery |
| Dimensions | 73 mm (W) x 129 mm (D) x 59 mm (H) |
| Weight | 400 g (0.88 lbs) including battery |
Accepts AC adaptor connection for continuous power, eliminating battery concerns.
Indicates effect status (ON/OFF) and battery level when effect is ON.
Connects the unit to an amplifier or another device for audio output.
Accepts instrument input signals and functions as the unit's power switch.
Activates or deactivates the effect by pressing the pedal.
Allows opening the pedal for battery replacement when loosened.
Controls the overall volume level of the effect sound.
Adjusts low-end frequency boost, emphasizing lower frequencies when turned clockwise.
Adjusts the tonal character, making sound milder (counterclockwise) or sharper (clockwise).
Controls the amount of distortion, increasing effect clockwise and decreasing counterclockwise.
Adds additional distortion, increasing power and expansiveness as turned clockwise.
Details on unit power-on/off sequence and battery status indication.
Sets initial knob positions before turning the effect on.
Depress the pedal switch to activate the effect; check CHECK indicator.
Use DIST and GAIN BOOST knobs; turning both up increases noise.
Fine-tune the sound's tonal character using the TONE knob.
Modify the low-end emphasis using the BOTTOM knob.
Adjust LEVEL knob to match sound level when effect is on vs. off.
Step-by-step guide to replace the unit's battery, including polarity and spring handling.
Addresses problems with the unit not powering on or the CHECK indicator not lighting.
Diagnoses issues related to connectivity, LEVEL knob setting, or amplifier volume.
Details on input/output levels, impedance, noise, controls, connectors, power supply, and current draw.
Provides physical dimensions, weight, included accessories, and optional items.
To Next Page
