To Next PageTo Next Page
Need help?Do you have a question about the Boss ME-6 and is the answer not in the manual?
General| AD/DA Conversion | 16-bit |
|---|---|
| Sampling Rate | 32 kHz |
| MIDI | No |
| Type | Multi-effects processor |
| Effects | Overdrive, Distortion, Chorus, Flanger, Phaser, Reverb, Delay |
| Inputs | 1 x Instrument |
| Outputs | 2 x 1/4" (L/Mono, R) |
| Power Supply | 9V DC adapter |
| Presets | 30 (User) + 30 (Preset) |
FCC compliance details for USA radio and TV interference.
Radio noise emissions compliance for Canadian radio and TV interference.
Highlights of the ME-6's analog/digital sound, effects, and modes.
Guidelines for safe power connection and optimal unit placement.
Instructions for cleaning and general safety measures.
Description of indicators, buttons, and pedals on the main unit.
Details of all input and output jacks on the rear of the unit.
Diagram and steps for connecting the ME-6 to guitar and amplifier.
Guidance for connecting footswitches and expression pedals.
Explanation of memory banks and patch selection.
Step-by-step guide to choosing patches using bank and number pedals.
How to control individual effects using pedals in Manual Mode.
Adjusting effect parameters directly during performance.
How to engage or disengage all effects for direct guitar sound.
Using an expression pedal for real-time volume adjustments.
Steps to change and store custom effects settings.
How to revert to original settings before saving.
Saving modified patch settings into the ME-6's internal memory.
Saving Manual Mode configurations for patches.
Duplicating settings from one patch to another.
Transferring settings between Manual Mode and patches.
Detailed explanation of Sustain, Attack, and Level controls.
Details on Mode, Drive, Tone, and Level parameters.
Controls for High Level, Mid Freq, Mid Level, Low Level, and Total Level.
Explanation of the Threshold control for noise reduction.
Controls for Time, Feedback, and Effect Level.
Details on Mode, Pre Delay, Rate, Depth, Effect Level, and Resonance.
Controls for Mode, Time, Tone, and Effect Level.
Adjusting the master output volume of the ME-6.
Guidance for resolving sound and patch selection problems.
Procedures for resetting single patches or the entire unit.
