Need help?Do you have a question about the Boss ME-30 and is the answer not in the manual?
General| Input Impedance | 1 M ohm |
|---|---|
| MIDI | No |
| Type | Multi-effects pedal |
| Effects | Overdrive/Distortion, Wah, Compressor, Equalizer, Modulation, Delay, Reverb |
| Presets | 30 |
| Output Impedance | 1k ohm |
| Display | 2-digit, 7-segment LED |
| Power Supply | AC Adaptor (PSA-series) |
| Inputs | 1/4" phone type |
| Outputs | 1/4" phone type |
Record and playback audio for practice, with speed adjustment.
Unit can run on batteries, offering mobility.
Large display and analog distortion for ease of use and sound quality.
Built-in pedal for controlling various sound parameters.
Explains symbols for risk identification and required actions.
Details symbols indicating important instructions, prohibitions, and required actions.
Essential safety rules for operation, handling, and environment.
Essential safety guidelines for using the optional AC adaptor.
Notes on power circuits, battery usage, and connecting/disconnecting devices.
Guidelines on avoiding interference, direct sunlight, and extreme temperatures.
Instructions for cleaning the unit and avoiding damage from solvents.
Information regarding data loss during repairs and liability.
Advice on careful handling of controls, cables, and volume levels.
Overview of the LCD display, operation buttons, and parameter controls.
Description of the bank and number pedals, indicators, and their functions.
Details on the various input and output connection jacks on the unit.
Explains the compressor effect for sustain and input signal adjustment.
Details the OD/DS effect, its types, and parameter controls like Drive and Tone.
Covers EQ for frequency adjustment and Phaser for sound swirling.
Describes the Noise Suppressor for cutting hum and noise.
Explains the delay effect for adding echoes and controlling time and feedback.
Introduces Chorus and Flanger effects for adding wavering and undulating sounds.
Details the effect that alters guitar pitch for various sounds.
Explains the tremolo effect for cyclical amplitude changes.
Describes the reverb effect for adding reverberation and decay.
How to use the pedal for Volume, Wah, Tremolo Arm, and Ring Modulator.
Simulates the characteristics of a guitar amplifier's sound.
Explains patches, presets, user memory, banks, and switching.
Guide for connecting the ME-30 to external audio equipment.
Navigating and selecting patches in Play mode.
Procedures for copying, exchanging, and editing patches.
How to store or discard changes made to patches.
Using Manual mode, Bypass, Tuner, and Phrase Trainer functions.
AUX input for practice, phrase trainer details, and battery replacement.
Restoring factory settings and using the blank chart for custom patches.
Solutions for no sound, low sound, and patch selection problems.
Details on audio, power, dimensions, and connectivity.
To Next Page
