Need help?Do you have a question about the Boss HM-2 Heavy Metal and is the answer not in the manual?
General| Type | Distortion |
|---|---|
| Model | HM-2 |
| Manufacturer | Boss |
| Technology | Analog |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Dimensions | 73mm (W) x 129mm (D) x 59mm (H) |
| Year Introduced | 1983 |
| Discontinued | 1991 |
| Controls | Level, Distortion |
| Inputs | 1 x 1/4 inch |
| Outputs | 1 x 1/4 inch |
| Power Supply | 9V DC |
Connects to an AC adaptor for power supply.
Adjusts low frequencies around 100 Hz to shape the tone.
Controls the volume difference between direct and effect sounds.
Connects the pedal's output to an amplifier.
Engages or disengages the HM-2 effect.
Shows effect status and serves as a battery level indicator.
Adjusts high frequencies around 1 kHz for tone shaping.
Controls the intensity of distortion and sustain time.
Connects the instrument to the pedal, powering it on.
Allows opening the pedal cover for battery access.
Provides step-by-step instructions for replacing the 9-volt battery.
Recommends using BOSS AC adaptors for operation and warns about third-party ones.
Specifies power source as 9V battery or AC adaptor.
Details the power draw of the unit.
Lists the various controls and indicators on the pedal.
Lists the input and output connection types.
States the impedance of the input jack.
Provides the physical size of the pedal in mm and inches.
Indicates the weight of the unit.
To Next Page
