Need help?Do you have a question about the Boss DS-2 and is the answer not in the manual?
General| Effect Type | Distortion |
|---|---|
| Technology | Analog |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Bypass | Buffered |
| Controls | Level, Tone, Distortion |
| Input | 1/4" |
| Output | 1/4" |
| Power Supply | 9V DC, 9V Battery |
| Dimensions | 73 x 129 x 59 mm |
| Weight | 400 g |
| Modes | Turbo Mode I, Turbo Mode II |
Lights up when effect is on; also serves as battery check indicator.
Adjusts the volume of the effect sound.
Adjusts the tone of the effect sound, emphasizing higher frequencies when rotated clockwise.
Connect an amplifier to this jack.
Pressing the pedal turns the effect on or off.
Connects to an AC adaptor for long and secure operation.
Selects between Turbo Mode I or II for different distortion characteristics.
Adjusts the depth of the distortion effect, deepening it clockwise.
Connects to a guitar or other instrument; turns unit on automatically.
Connects an optional footswitch to select Turbo Mode I or II using a pedal.
Loosen to open the cover for battery replacement.
Important warnings regarding battery life, usage conditions, and general care.
Provides powerful, flat distortion sound without muffling, even at low volumes.
Offers sticky distortion with unique middle-range characteristics, suitable for lead guitar.
Illustrates various control settings for different sound styles like usual distortion and overdrive.
Detailed steps for replacing the 9-volt battery, including polarity and screw handling.
Instructions for using the AC adaptor, including correct model selection and connection procedure.
To Next Page
