Need help?Do you have a question about the Boss DD-8 and is the answer not in the manual?
General| Type | Digital Delay |
|---|---|
| Maximum Delay Time | 10 seconds |
| Power Supply | 9V DC |
| Tap Tempo | Yes |
| Presets | No |
| Expression Pedal Input | Yes |
| Current Draw | 65 mA |
| Input Impedance | 1 M ohm |
| Output Impedance | 1 k ohm |
| Modes | ANALOG, STANDARD, TAPE, WARM, REVERSE, SHIMMER, WARP |
| Delay Time | 1 ms to 10 seconds |
| Outputs | 2 x 1/4 inch |
| Dimensions | 73 x 129 x 59 mm |
| Mono/Stereo | Mono/Stereo |
| Looper | Yes |
| Bypass | Buffered bypass |
| Recommended Load Impedance | 10k ohms or greater |
| Accessories | Owner's Manual, Leaflet (USING THE UNIT SAFELY) |
| Weight | 430 g |
| Connectors | 1/4" jacks |
Accepts AC adaptor connection for continuous power.
Indicates effect status and battery level.
Connectors for audio signals and amplifier output.
Connection point for external tempo or expression controls.
The main pedal switch and thumbscrew for battery changes.
Adjusts effect volume, feedback level, and delay time.
Selects delay modes and the carryover function.
Descriptions of Standard, Analog, Tape, and Warm delay effects.
Descriptions of Reverse, +RV, SHIM, MOD, WARP, GLT delay effects.
Functionality for recording and playback of performance.
Illustrates typical connection setups for the DD-8.
Diagrams and instructions for connecting various footswitches.
Warnings on volume, cable types, and power-up order.
Steps to activate effect, select mode, and adjust basic settings.
Specifies the note value for quarter-note interval tempo input.
Procedure for inputting tempo by pressing the pedal switch.
How to input tempo using connected footswitches.
Steps for recording, playback, and layering performances.
Controlling playback volume and stopping playback.
Using footswitches for loop playback and erase functions.
How to activate the TWIST effect using footswitches.
Mono delay with A input and A output configuration.
Long delay with A input and B output configuration.
Effect output from B input and A output.
Various stereo delay configurations for mono/stereo input/output.
Produces effect and direct sound outputs.
Choosing between panning, wide stereo, and independent stereo delay.
Configuring an expression pedal to control effect parameters.
Step-by-step guide for replacing the battery.
Technical details including input/output levels, impedance, power, and dimensions.
To Next Page
