Need help?Do you have a question about the Boss DD-2 and is the answer not in the manual?
General| Effect Type | Digital Delay |
|---|---|
| Controls | Delay Time, Feedback, Effect Level |
| Bypass | Buffered Bypass |
| Power Supply | 9V DC |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Current Draw | 55 mA |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Dimensions | 73 mm (W) x 129 mm (D) x 59 mm (H) |
Step-by-step guide on how to replace the 9-volt battery in the unit.
Explains the function of the Check Indicator for effect status and battery life.
Describes how the Effect Level knob adjusts the output volume of the delay sound.
Details the output signal from the Main Output Jack, typically mixed sound.
Explains how the Feedback Level knob controls the number of delay repetitions.
Describes how the Delay Time knob adjusts the delay duration, often in conjunction with the mode switch.
Identifies the input jack for connecting guitars or other instruments.
Explains the function of the Direct Output Jack for isolating the direct signal.
Information regarding the thumb screw used for opening the pedal for battery replacement.
Indicates the location and use of the AC adaptor jack for power connection.
Explains the different modes (S, M, L, Hold) and their effect on delay time.
Describes the function of the Pedal Switch for activating/deactivating effects or hold.
Step-by-step instructions for using the Delay (Echo) effect mode of the pedal.
Step-by-step instructions for using the Hold effect mode of the pedal.
To Next Page
