Boss FZ-2 Hyper fuzz - User Manual

Instructions
Thank you for purchasing the BOSS FZ-2 HYPER FUZZ. To
make the best use of the unit, please read the instructions
carefully.
-Despite its compact size, this effect unit packs two kinds
of fuzz providing characters that are quite different. It also
provides gain boosting based on a discrete architecture.
-While recreating the traditional fuzz sound, this unit also
generates a distortion that could be described as
contemporary and convivial.
-Two tone controls allows the sound to be adjusted until
you have precisely the sound you need.

Summary

Panel Description and Connections

AC Adaptor Jack

Check Indicator

Level Knob

Tone Knob (Treble)

Tone Knob (Bass)

Output Jack

Pedal Switch

Toggles the effect ON or OFF.

Mode Selection Knob

Selects the effect mode: FUZZ 1, FUZZ 2, or GAIN BOOST.

Gain Knob

Controls distortion depth for fuzz modes or gain level for boost.

Input Jack

Connects the instrument; includes a power switch function.

Operating the FZ-2 HYPER FUZZ

Operation for FUZZ 1 or FUZZ 2

Step-by-step guide for using fuzz modes.

Operation for GAIN BOOST

Step-by-step guide for using the gain boost mode.

Maintenance and Important Notes

Battery Replacement Procedure

Environmental and Operational Precautions

Troubleshooting and Service

Boss FZ-2 Hyper fuzz Specifications

Electrical Specifications

input impedance	1 MO
output impedance	1 kQ
recommended load impedance	IQkO or greater
residual noise	-70 dBm (IHF-A, Typ.)
power supply	DC9V; battery (9V), AC Adaptor (PSA Series: Option)
current draw	16 mA (DC9V)

Weight and Dimensions

dimensions	70 (W) x 125 (D) x 55 (H) mm / 2-3/4" x 4-15/16" x 2-3/16"
weight	420 g / 15 oz (including battery)