4
Panel Descriptions
fig.ML-2-name1.eps
1. AC Adaptor Jack
This jack accepts the connection of an AC
adaptor (optionally available BOSS PSA-se-
ries). By using an AC adaptor, you can play
without being concerned about how much
battery power you have left.
* Use only the specified AC adaptor (PSA-
series), and make sure the line voltage at the
installation matches the input voltage specified
on the AC adaptor's body. Other AC adaptors
may use a different polarity, or be designed for
a different voltage, so their use could result in
damage, malfunction, or electric shock.
* If the AC adaptor is connected while power is
on, the power supply is drawn from the AC
adaptor.
* If there is a battery in the unit while an AC
adaptor is being used, the ML-2 will switch
over to battery-powered operation should the
12
3 6
4
5
ML-2_e1.fm 4 ページ ２００６年１２月８日 金曜日 午前１１時４３分
To Next Page
Loading...
Need help?
General
