BOSS eBand Training Guide
7
1. Press PLAY to start playback of the song.
2. While the song is playing, press the A / B button where you want playback to
begin. This sets the A point for your looped section: shows in the lower
left of the display.
3. Press A / B again when you reach the location where you want playback to
loop around. This sets the B point for the loop, and the song begins looping
within the A and B points you’ve set.
4. To cancel the loop points, press STOP twice, and then press A / B until
“ONE” appears in the display.
Tempo
The Phrase Trainer feature lets you slow down or speed up a song without
affecting its pitch. This can be handy for learning a guitar solo, or just making it
easier to play along with a song. Here’s how to use the Phrase Trainer:
1. Select a song.
2. Press PLAY.
3. Press SPEED.
4. Turn the main dial to adjust the playback speed, from -50%- to +130%.
5. When you’re finished, press SPEED to return to normal speed.
Key / Pitch
1. From the main screen, press the SPEED button.
2. Using the dial, make sure the SPEED is set to 100%.
3. Press the cursor right button twice (make sure SHIFT is highlighted).
4. Press PLAY.
5. Turn the dial either way to change the key / pitch of the song.