Page | 3
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
no No Load Speed Rotational speed, at no load
Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye, Face & Ear Protection
Always wear safety goggles or safety glasses with side shields,
earplugs and a face shield when operating this product.
Safety Alert Precautions that involve your safety.
Wear Gloves
Always wear nonslip, heavy-duty protective gloves when
operating this product.
Wear Safety Footwear Always wear nonslip safety footwear when operating this product.
Keep Bystanders Away Always keep bystanders at least 25 ft. (7.5 m) away.
Keep Hands Away Always keep hands away from the wedge and the ram.
Pinch Point
Never touch the cylinder bed, ram, or wedge during machine
operation.
Rotating & Moving Parts Alert Beware of rotating and moving parts, serious injury could occur.
Electric Shock Alert
Never touch damaged or exposed wires while the machine is
connected to a power source.
To Next Page
Loading...