94
Chapter 7 Using the GT-10B Connected
to a Computer Via USB
With the GT-10B, you can use USB to transmit both digital audio signals between the GT-10B and your computer.
Just by connecting the GT-10B to your PC/Mac with a USB cable, audio signal can be transferred bidirectionally via USB.
When the Driver Mode parameter (p. 95) set to the Standard, your PC/Mac uses a standard driver that is found on OS. The driver
will be installed automatically once connected with your computer via USB.
The GT-10B supports the following compatible OS:
• Windows XP/Vista
• Mac OS X 10.4.3 or later
When the Driver Mode parameter (p. 95) set to the Advanced and use specialized driver, you can record, play back, and edit
audio with high-quality sound and stable timing.
It also allows you to control the GT-10B using MIDI messages via USB.
You can download the special GT-10B driver from the Roland local website.
Install the special GT-10B driver before you connect the GT-10B to your PC/Mac.
The program and procedures for installing the driver vary according to the operating environment; carefully read the Readme
included in the downloaded file.
If the Driver Mode parameter set to the Advanced (p. 95), and you connect the GT-10B to your PC/Mac by a USB cable, you can
transfer MIDI message bidirectionally via USB.
Set your computer MIDI input and output ports to “GT-10B.”
However, MIDI message transfer via GT-10B’s MIDI connectors become inactivated in this situation.
For more on MIDI-related settings, refer to “Making the Settings for MIDI Functions” (p. 84).
Before Connecting with USB
Installing and Setting the USB Driver
Exchanging MIDI Messages between the Computer and the GT-10B
What is a USB Driver?
A USB driver is software that acts as a go-between in transferring data between computer applications (such as recording
software and sequencer software) and the USB device when the computer and USB device are connected using a USB cable.
The USB driver transmits data from the applications to the USB device, and conversely, passes messages from the USB
device to the applications.
BPM
PHRASE LOOP
ON / OFF
GT-10B
Application
Software
USB
Driver
Computer
USB Cable
USB Connector
GT-10B_e.book 94 ページ ２００８年２月２６日 火曜日 午後３時３０分
To Next Page
Loading...
Need help?
General
