R
Rhonda GarzaAug 1, 2025
What to do if memory is full on Boss Music Pedal?
- KKatie WoodsAug 1, 2025
If the memory of your Boss Music Pedal is full, delete any phrases you no longer need.
What to do if memory is full on Boss Music Pedal?
If the memory of your Boss Music Pedal is full, delete any phrases you no longer need.
What to do if further overdubbing is not possible on Boss RC-3 Music Pedal?
If you can't overdub any further on your Boss Music Pedal, try re-saving the phrase.
Why can't I change the playback tempo on my Boss Music Pedal?
If the playback tempo on your Boss Music Pedal cannot be changed, consider these possible causes: * If the phrase hasn't been saved, save it. * If phrases are currently being switched (the PLAY indicator is blinking rapidly), wait until the switch is complete. * If you're trying to set the tempo for a phrase looped over an interval shorter than approximately 1.5 seconds, use a longer loop interval.
What to do if WAV file is unplayable on Boss RC-3 Music Pedal?
If a WAV file is unplayable on your Boss Music Pedal, check the format of the WAV file.
nominal output level | -20 dBu |
---|---|
output impedance | 1 k ohm |
DC voltage | 9 V |
maximum recording time | Approx. 3 hours |
---|---|
maximum number of stored phrases | 99 phrases |
data format | WAV (44.1 kHz, 16-bit linear, stereo) |
weight | 450 g |
---|---|
width | 73 mm |
depth | 129 mm |
height | 59 mm |