To Next PageTo Next Page
Need help?Do you have a question about the Boss RC-10R and is the answer not in the manual?
General| Sound effects | Looper, Reverberation |
|---|---|
| Sound effects quantity | - |
| DC-in jack | Yes |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Connectivity technology | Wired |
| 6.35 mm (1⁄4-inch) input | 1 |
| Display type | LCD |
| Power source type | DC |
Weight and Dimensions| Depth | 138 mm |
|---|---|
| Width | 101 mm |
| Height | 63 mm |
| Weight | 620 g |
Details controls and indicators on the RC-10R's top panel.
Details connections for instruments, amps, and power supply on the rear panel.
Details connections for MIDI and USB devices on the side panel.
Procedure for safely powering the unit and connected equipment on and off.
Warning against turning off power during critical operations to prevent data loss.
Configuration options for the automatic power-off function of the RC-10R.
Stores up to 99 combinations of rhythm and loop patterns.
Defines rhythm divisions (Intro, PTN 1/2, Ending) and looper tracks (TRK 1/2).
Contains overall settings for the entire RC-10R unit.
Defines 'recording' as the first track and 'overdubbing' as subsequent layers.
Guide to choosing rhythm patterns from genres and pattern lists.
Instructions on playing, switching patterns, inserting fill-ins, and stopping rhythms.
How to change the tempo (BPM) and volume level of the rhythm.
How to select phrase memory slots and prepare for recording.
Steps to record audio and layer additional sounds onto existing loops.
How to start, manage loop playback, and stop the looping process.
How to undo, redo, or clear recorded audio layers and manage loop content.
How to enable simultaneous operation (SYNC ON) or separate operation (SYNC OFF).
Steps to record loops using rhythm as a backing track.
Instructions to save recorded loops and rhythm settings to memory.
Steps to remove unwanted phrase memories from the unit.
Procedure to restore the unit to its original factory default settings.
Information on attaching rubber feet and obtaining the parameter guide.
Details on looper, rhythm, memory, power, dimensions, and weight.
Covers AUTO OFF safety and power supply/voltage warnings.
Includes child safety, data backup, repair liability, and general usage warnings.
Information on copyright restrictions and permitted use of product content.
Details on company and product names and their registered trademarks.
