Basic Operation
17
Recording a TRK 2
Just as you can switch the rhythm between the PTN 1
and the PTN 2, you can also switch between the looper’s
TRK 1 and TRK 2 during recording or playback. This lets
you create a backing track that contains dierent chord
progressions appropriate for the song’s playback parts.
1. During TRK 1 recording, overdubbing, or
playback, hold down the [RHYTHM] switch for
two seconds or longer.
The rhythm switches to playing the PTN 2, and at
the same time the looper switches to recording the
TRK 2.
In the same way as when recording the TRK 1, you
can also switch the TRK 2 between overdubbing and
playback.
MEMO
5 The rhythm part that is playing and the looper track
that is recording, overdubbing, or playing are shown in
the center of each indicator.
& “5 LOOP indicator” (p. 2)
& “8 RHYTHM indicator” (p. 3)
Stopping Playback
1. Press the [RHYTHM] switch twice in succession.
Playback continues to the end of the measure, the
ending plays, and then playback stops.
Phrase Memories (Write/Delete)
Saving a phrase
If you record or overdub, or make rhythm settings, and
then select another phrase memory or turn o the
power, your phrase settings will be lost.
If you want to keep your phrase, you must write it into
memory.
1. While stopped, hold down the [MENU] button
and press the [EXIT] button.
The MENU screen appears.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
