20
Appendix
Returning to the Factory Settings
(Factory Reset)
Restoring the RC-10R’s settings to their original factory
default settings is referred to as “Factory Reset.”
Factory reset lets you return the system settings to their
factory-set state or initialize all phrase memories. When
you initialize the phrase memories, the phrases are
deleted.
1. Hold down the [MENU] button and press the
[EXIT] button.
The MENU screen appears.
2. Turn the [VALUE] knob to select “FACTORY
RESET,” and then press the [VALUE] knob to
conrm.
You see a screen where you can specify the range of
the factory reset.
3. Specify the range of the factory reset.
To advance the cursor
Press the [VALUE] knob.
To return the cursor
Press the [EXIT] button.
To edit the value
Turn the [VALUE] knob.
Parameter Value Explanation
FROM
TO
SYS
System and MIDI parameter
settings
1–99
The contents of phrase
memories 1–99