Boss RC-10R User Manual

Appendix
21
4. Press the [VALUE] knob to conrm the range of
the factory reset.
If you decide to cancel, press the [EXIT] button.
5. Turn the [VALUE] knob to select “YES,” and then
press the [VALUE] knob.
The factory reset is executed.
NOTE
5 Never turn o the power while “EXECUTING...” is shown. Doing
so might cause all saved data to be lost.
Attaching the Rubber Feet
You can attach the rubber feet
(included) if necessary.
Attach them in the locations shown
in the illustration.
Using the unit without rubber feet
may damage the oor.
* When turning the unit over,
be careful so as to protect the
buttons and knobs from damage.
Also, handle the unit carefully; do not drop it.
To Obtain the Parameter Guide
1. Access the following URL.
http://www.boss.info/manuals/
2. Choose “RC-10R” as the
product name.

Boss RC-10R Specifications

General

Sound effects	Looper, Reverberation
Sound effects quantity	-
DC-in jack	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
6.35 mm (1⁄4-inch) input	1
Display type	LCD
Power source type	DC

Weight and Dimensions

Depth	138 mm
Width	101 mm
Height	63 mm
Weight	620 g