Boss RC-1 User Manual

Skip to content
Manuals+
User Manuals Simplified.
BOSS Loop Station Pedal Owner’s Manual
Home » Boss » BOSS Loop Station Pedal Owner’s Manual
RC-1
loop Station
Owner’s Manual
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (supplied on a separate sheet). These sections provide important
information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this manual
should be read in its entirety. The manual should be saved and kept on hand as a convenient reference.
Welcome to the Loop Station!
The RC-1 is a petal-type recorder that lets you record audio phrases from your guitar or bass, and play them back by operating the pedal. You can create a wide variety of performances by
layering sound while you record and carry out playback in real-time.
• It’s easy to create a loop phrase.
• You can record up to a maximum of approximately 12 minutes (stereo).
• You can input audio in stereo.
Contents [ hide
1 Panel Descriptions
2 Precautions When Connecting
3 Caution When Connecting an External
Footswitch
4 Turning On the Power
5 Caution when turning off the power
6 Basic Operation
7 Deleting a Phrase
8 Canceling an Overdub (Undo/Redo)
9 Connecting to an External Footswitch
10 Changing the Recording Mode or Stop Mode
11 Changing the Battery
12 Specifications
13 About the Battery
14 Repairs and Data
15 Intellectual Property Right
16 File Downloads
17 Related Manuals

Boss RC-1 Specifications

General

Best uses	Guitar
Output level	-20/0 dB
Product type	Expression pedal
Product color	Red
Non-slip surface	Yes
Output impedance	1000 Ω
Nominal input level	-20 dB
6.35 mm (1⁄4-inch) input	3
6.35 mm (1⁄4-inch) output	2
Battery voltage	9 V
Power consumption	95 mA
Power source type	AC, Battery
Number of batteries supported	1

Weight and Dimensions

Depth	129 mm
Width	73 mm
Height	59 mm
Weight	430 g