Need help?Do you have a question about the Boss RIOT RT945 and is the answer not in the manual?
Details features for 2-channel amplifier models, including specs and operation.
Details features for 4-channel amplifier models, covering their capabilities and specifications.
Outlines the features and specifications specific to the 5-channel amplifier model.
Describes the features and technical specifications of the monoblock amplifier.
Explains the crossover functionality across different amplifier models.
Details the amplifier's protection mechanisms and how to reset them.
Details performance and considerations for 2-ohm speaker loads.
Details the proper wiring procedures and terminal connections for the amplifier.
Explains the importance and replacement procedure for power fuses.
Provides instructions and considerations for securely mounting the amplifier.
Explains high-level input wiring and remote subwoofer control for 2 and 4 channel amps.
Details high-level input wiring and remote control for the 5-channel amplifier.
Describes the function and usage of the mode switch settings.
Illustrates wiring for a monoblock amplifier and a single speaker output.
Shows standard stereo speaker connections for 2-channel amplifiers.
Details how to connect speakers in a bridged configuration for 2-channel amps.
Explains how to wire for simultaneous subwoofer and stereo speaker operation.
Illustrates speaker connections for 4-channel amplifier models.
Shows how to configure 4-channel amplifiers for bridged speaker output.
Details wiring for a 4-channel amp to operate a subwoofer and stereo speakers.
Illustrates speaker connections for the 5-channel amplifier.
Details bridged speaker connections for the 5-channel amplifier.
Provides crucial safety advice for installation and operation to prevent damage.
Offers solutions for common problems like no output or noise.
To Next Page
General
