Need help?Do you have a question about the Boss SD-1 and is the answer not in the manual?
General| Effect Type | Overdrive |
|---|---|
| Controls | Level, Tone, Drive |
| Bypass | Buffered Bypass |
| Power Supply | 9V DC |
| Output Impedance | 10 kOhms |
| Dimensions | 73mm (W) x 129mm (D) x 59mm (H) |
| Weight | 400 g |
| Connectors | Input Jack, Output Jack, AC Adaptor Jack |
| Current Draw | 6 mA (DC 9V) |
Regulates over drive effect, distortion harmonics, and sustain.
Controls the tone color of the sound from crisp highs to soft lows.
Controls the output loudness to match or contrast with the straight signal.
LED indicator shows unit status and helps check battery level.
Input jack powers the unit; output provides low impedance connection.
Connects the BOSS AC Adaptor for power when battery operation is not ideal.
Features a unique FET switching system for silent, pop-free electronic switching.
Allows access to the battery compartment under the footswitch plate without tools.
Illustrates how to connect the amplifier, guitar, and power source to the pedal.
Depress pedal switch, check LED for effect status and battery condition.
Adjust OVER DRIVE, LEVEL, and TONE knobs for desired sound characteristics.
Advice on handling, storage, and power connection to prevent damage or malfunction.
Details on optional BOSS AC Adaptors (ACA-120, ACA-240, ACA-220) for power supply.
Step-by-step guide to replacing the 9V battery, including opening and closing the pedal.
To Next Page
