Need help?Do you have a question about the Boss Slicer SL-2 and is the answer not in the manual?
General| Brand | Boss |
|---|---|
| Model | Slicer SL-2 |
| Category | Music Pedal |
| Language | English |
Accepts connection of an AC Adaptor (PSA series; sold separately).
Shows effect ON/OFF, tempo, and battery status. Lights red when ON, green when OFF.
Connect to amp or monitor speakers for mono or stereo output.
Connect guitar, bass, or effect unit; INPUT A powers the unit.
Steps for turning the unit and connected amp on and off safely.
Details on BALANCE, ATTACK, VARIATION, Type, TEMPO, and DUTY knobs.
Explanation of MIDI IN, USB port, and Pedal switch.
Diagrams and explanations for connecting FS-5U, FS-6, FS-7 footswitches.
Guidance on connecting an expression pedal (EXP).
How to select various ways of outputting the effect sound using VARIATION knob.
How to assign functions like TAP TEMPO or MOMENTARY to a footswitch.
Assigning expression pedal to control DUTY, ATTACK, TEMPO, or BALANCE knobs.
Using an expression pedal to control the output level of the effect sound.
Using CC messages for output level, effect ON/OFF, and tap tempo.
Synchronizing the SL-2's tempo with an external MIDI device.
How to set the MIDI channel used for receiving messages.
Steps to return the SL-2 to its original factory settings.
Step-by-step guide for replacing the battery.
Recommendations and precautions for using batteries.
Warnings regarding connecting/disconnecting power cords and adaptors.
Advice on backing up data before repairs and Roland's liability.
To Next Page
