Bostitch 700 SERIES User Manual

OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
105805REVF 11/05
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE
SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA
HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON
SU REPRESENTANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX
AVERTISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI
VOUS AVEZ DES QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE
CONCESSIONNAIRE BOSTITCH.
STANLEY FASTENING SYSTEMS L.P.
600, 700 & 800 SERIES
PNEUMATIC STAPLER
ENGRAPADORA NEUMÁTICA
AGRAFEUSE PNEUMATIQUE

Bostitch 700 SERIES Specifications

General

Brand	Bostitch
Model	700 SERIES
Category	Staple Gun
Language	English

Summary

Limited Warranty - U.S. and Canada

Safety Instructions

General Safety Precautions

Covers eye protection, air supply hazards, loading, operation, and maintenance safety.

Air Supply and Connections

Air Supply Hazards

Prohibits specific gases and pressure limits for safe tool operation.

Fittings and Hoses

Guidelines for selecting and installing air fittings and hoses for optimal performance.

Tool Specifications

Model and Fastener Specifications

Details on tool models, staple series, crown width, wire size, and leg length.

Operating Pressure and Air Consumption

Information on recommended operating pressure and air volume requirements.

Loading the Tool

Loading Procedure

Step-by-step instructions for loading staples into the magazine.

Tool Operation

Operating Systems Overview

Explanation of the three available operating systems: Trigger, Contact Trip, and Sequential Trip.

Contact Trip Operation Modes

Details on single fastener placement and rapid fastener operation for contact trip tools.

Sequential Trip Operation

Procedure for operating sequential trip models for precise fastener placement.

Tool Operation Check

Operational Verification

Steps to verify correct operation for trigger, contact trip, and sequential trip systems.

Maintaining the Pneumatic Tool

Assembly Procedure for Seals

Guidance on lubricating and assembling O-rings and internal parts during repair.

Air Supply Pressure and Volume Importance

Explains the critical role of air volume and potential causes of restriction.

Trouble Shooting

Common Problems and Solutions

Lists common issues like leaks, failure to cycle, and skipping fasteners with their causes and corrections.

Accessories and Recommended Tools

Directional Exhaust Deflector

Instructions for adjusting the directional exhaust deflector.

Quick Release Magazine

Procedure for clearing jams using the quick release magazine feature.

Available Accessories

List of available lubricants, kits, and attachments for the tool series.

Recommended Tools

List of recommended tools for maintenance and operation.