Bostitch 800 SERIES User Manual

OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
105805REVF 11/05
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE
SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA
HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON
SU REPRESENTANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX
AVERTISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI
VOUS AVEZ DES QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE
CONCESSIONNAIRE BOSTITCH.
STANLEY FASTENING SYSTEMS L.P.
600, 700 & 800 SERIES
PNEUMATIC STAPLER
ENGRAPADORA NEUMÁTICA
AGRAFEUSE PNEUMATIQUE

Bostitch 800 SERIES Specifications

General

Brand	Bostitch
Model	800 SERIES
Category	Staple Gun
Language	English

Summary

Introduction

Safety Instructions

Air Supply and Connections

Loading Tool

Operation

Maintaining the Tool

Tool Specifications

Fastener Specifications

Details required fastener types and sizes for each tool model.

Tool Air Fitting

Specifies the type of air fitting required for the tool.

Operating Pressure

Defines the recommended air pressure range for optimal tool performance.

Air Consumption

Outlines the air volume required for different tool series models.

Operation Modes

Contact Trip

Explains the contact trip operation for rapid fastener placement.

Sequential Trip

Explains sequential trip for accurate fastener location.

Trigger Operated

Explains trigger-only operation for specific applications.

Lubrication

Cold Weather Operation

Provides guidance on operating the tool in cold weather conditions.

Loading the 600,700 & 800 Series

Dial-A-Depth Fastener Control Adjustment

Tool Operation

Trigger Operation

Describes how the trigger-operated model drives fasteners.

Contact Trip Operation

Details the two methods for driving fasteners with a contact trip tool.

Sequential Trip Operation

Explains how to operate a sequential trip tool for fastener driving.

Tool Operation Check

Pneumatic Tool Maintenance

Replacement Parts

Recommends using genuine Bostitch replacement parts for optimal performance.

Assembly Procedure for Seals

Provides instructions for lubricating and assembling seals during repair.

Air Supply-Pressure and Volume

Explains the importance of air volume and potential causes of reduced flow.

Trouble Shooting

Directional Exhaust Deflector

Quick Release Magazine

Accessories Available

Recommended Tools