Need help?Do you have a question about the Boston Acoustics PowerVent PV800 and is the answer not in the manual?
Explains connecting the subwoofer via line or speaker level inputs for various systems.
Details connecting the subwoofer to digital 5.1 home theater systems for optimal LFE reproduction.
Guides connecting the subwoofer using speaker wire for stereo or Dolby Pro Logic systems.
Explains connecting via the "use crossover control" input for stereo or Dolby Pro Logic systems.
How to adjust the subwoofer's sound level for desired output.
How to configure the crossover frequency and polarity for optimal bass blending.
Details automatic and manual power on/off functions for the subwoofers.
Lists required test equipment and essential initial inspection steps for the amplifier.
Covers setting initial parameters and calibrating amplifier bias current.
Procedures for verifying amplifier output voltage and frequency response.
Diagnosing and resolving blown fuses, low output, and 60 Hz hum problems.
Troubleshooting no signal, dirty output, and other audio quality issues.
General| Type | Powered subwoofer |
|---|---|
| Enclosure Type | Bass reflex |
| Driver Size | 8 inches |
| Inputs | Line level, speaker level |
| Phase Switch | 0/180 degrees |
To Next Page