Do you have a question about the Boston Acoustics PowerVent PV1000 and is the answer not in the manual?
Read, retain, and heed warnings. Avoid water, heat, and ensure proper ventilation.
Use correct power sources, ensure grounding, protect cords, and handle servicing carefully.
Identify conditions requiring service and follow guidelines for repairs and replacement parts.
FCC compliance for Class B digital devices, ensuring protection against residential interference.
Industry Canada compliance for Class B radio noise emissions from digital apparatus.
Manufacturer's declaration of product conformity to applicable European standards and directives.
Compliance with EMC and Low Voltage Directives as per European standards.
Compliance with AS/NZS 3548 for Class B digital devices.
Conformance to Class 2 Information Technology Equipment standards for radio interference.
Technical details including frequency response, power, dimensions, weight, and finish.
Overview of the PV1000 subwoofer's features, performance, and technology.
Instructions for connecting to 5.1 systems using the LFE channel for optimal bass reproduction.
Guide for connecting to Dolby Pro Logic systems for enhanced bass output.
Procedure for using an RCA Y-adapter to improve subwoofer output level.
Connecting the subwoofer to stereo receivers, integrated amplifiers, or preamplifiers.
Explanation of Volume, Crossover, and Polarity controls on the front panel.
Description of the Power off/on switch on the rear panel.
Guidance on optimal placement for bass output and interaction with room acoustics.
Details of the one-year limited warranty for defects in materials and workmanship.
Instructions on how to obtain service or assistance if the product requires repair.
| frequency response | 22–150Hz |
|---|---|
| subwoofer amplifier power | 1000 watts continuous |
| THD | <0.5% THD, 850 watts, 20-150Hz |
| subwoofer crossover | 50–150Hz |
| crossover slope | 24dB/octave low-pass |
| crossover bypass | Yes |
| bass unit | 10" (250mm) DCD down-firing |
| passive radiator | 10" (250mm) rear-firing |
| enclosure type | Passive Radiator |
| dimensions | 14[3]/4 x 11[1]/2 x 14[1]/8" (375 x 293 x 359mm) |
|---|---|
| weight | 40 lbs (18kg) |
| frequency response | 26–150Hz |
|---|---|
| subwoofer amplifier power | 300 watts continuous |
| THD | <0.5% THD, 250 watts, 20-150Hz |
| subwoofer crossover | 50–150Hz |
| crossover slope | 24dB/octave low-pass |
| crossover bypass | Yes |
| bass unit | 12" (300mm) DCD down-firing |
| enclosure type | Dual Ported |
| dimensions | 18 x 14[1]/4 x 19" (458 x 363 x 483mm) |
|---|---|
| weight | 40 lbs (18kg) |
| frequency response | 29–150Hz |
|---|---|
| subwoofer amplifier power | 120 watts continuous |
| THD | <0.5% THD, 100 watts, 20-150Hz |
| subwoofer crossover | 75–150Hz |
| crossover slope | 24dB/octave low-pass |
| crossover bypass | Yes |
| bass unit | 10" (250mm) DCD down-firing |
| enclosure type | Dual Ported |
| dimensions | 16[1]/2 x 11[7]/8 x 16[1]/8" (420 x 302 x 410mm) |
|---|---|
| weight | 30 lbs (14kg) |
| frequency response | 44–150Hz |
|---|---|
| subwoofer amplifier power | 65 watts continuous |
| THD | <0.5% THD, 50 watts, 30-150Hz |
| subwoofer crossover | 75–150Hz |
| crossover slope | 24dB/octave low-pass |
| crossover bypass | Yes |
| bass unit | 7" (180mm) DCD internal |
| enclosure type | Bandpass |
| dimensions | 19[1]/2 x 10 x 11" (496 x 254 x 280mm) |
|---|---|
| weight | 25 lbs (12kg) |











