Need help?Do you have a question about the Boston Scientific Swiss LithoCast Trilogy FT-235 and is the answer not in the manual?
General| Device Category | Medical Equipment |
|---|---|
| Device Type | Lithotripter |
| Manufacturer | Boston Scientific |
| Patient Table | Integrated |
| Shock Wave Rate | 1-2 Hz |
| Weight | 1500 kg |
Steps to place the console, remove protective film, and install stone catcher support.
Steps to fill the cooling system with demineralized water, ensuring proper level.
Connecting the equipotential conductor for electrical safety and potential equalization.
Connecting the pedal cord to the console and ensuring proper placement.
Steps for installing the single-use stone catcher and the in-house aspiration system.
Connecting the sterilized handpiece to the console, ensuring the connector is dry.
Connecting the device to a protected mains power supply and verifying voltage.
Selecting and installing the appropriate probe onto the handpiece using a torque wrench.
Steps to turn on the console, perform diagnostic tests, and prepare for use.
Accessing and configuring treatment parameters via the touch screen interface.
Performing preliminary tests to ensure the device and components are working correctly before treatment.
Steps for introducing and positioning the probe within the endoscope and contacting the stone.
Configuring console parameters based on probe type and selecting pre-set treatments.
Manually adjusting impact, ultrasound, and suction parameters for personalized treatment.
To Next Page