Vercise
TM
DBS Charging Handbook
Vercise
TM
DBS Charging Handbook
92357527-02 Page 12 of 101
Afx the adjustable straps so that the Belt is slightly loose at rst. In order to properly use the Charging Belt, both of the
straps must go through the Belt Loop (Figure 2).
Figure 2. Adjustable Strap Placed Through Belt Loop and Afxed Using Fasteners
6. Position the Charger over the Stimulator.
When the Charger is aligned over the Stimulator, the beeping will stop. For the best charging results, make sure the
Charger is well ventilated and centered over the Stimulator (Figure 3). See the “Properly Aligning the Charger” and
“Tips for Properly Aligning the Charger” sections of this manual to ensure you center the Charger over the Stimulator.
Figure 3. Ideal Alignment of Charger (Outlined) Over Stimulator (Dotted Line)
To Next Page
Loading...
Need help?
General
