Boston Scientific Vercise DB-64126 User Manual

Vercise
TM
DBS Charging Handbook
Vercise
TM
DBS Charging Handbook
92357527-02 Page 18 of 101
en
11. Place the Charger above the Stimulator.
12. Slowly move the Charger down, towards the Stimulator.
13. Stop moving the Charger when it stops beeping.
14. Make a mark on your skin at the bottom edge of the
Charger (Figure 9).
15. Place the Charger below the Stimulator.
16. Slowly move the Charger up, towards the Stimulator.
17. Stop moving the Charger when it stops beeping.
18. Make a mark on your skin at the top edge of the Charger
(Figure 10).
The marks on your skin should create a square or
crosshair. The center of this crosshair indicates the center
of the Stimulator.
19. Now that you have located the center of the Stimulator,
properly align the Charger over the Stimulator (Figure 11).
Figure 9. Top Edge Alignment of Charger
Figure 10. Bottom Edge Alignment of Charger
Figure 11. Proper Alignment of Charger

Boston Scientific Vercise DB-64126 Specifications

General

Brand	Boston Scientific
Model	Vercise DB-64126
Category	Battery Charger
Language	English