Specifications
● Voltage: AC100V-250V 50/60Hz
● Power consumption:110W
● Lithium Battery:8800mAh
● Light source:6pcs 18W high brightness 6 in 1 Led
● LED angle:25 degree
● Color:16.7 million kinds of color change
● Control channels:6/10 chs
● Built in 2.4G receiver/ transmitter for wireless DMX operations
● Control mode: DMX512, master/slave, auto, sound active,IR control & WIFI Control
● Automatic model:color change,strobe,dimmer,gradual change change
● Operation menu: LCD display
● Packing size: 175*175*235mm
● N.W: 2.4kg
● G.W:3.1kg
Charging
Tip for the battery and charge:
● The battery can last for 3 hours when all LEDs on after full charge , and can last
for more than 6-7 hours on auto running mode. Up to 25 Hours with one color diode on.
Results will vary based on brightness of LEDs
● It is suggested to charge the battery for at least 4 hours, which will extend the life span of the
battery.
Most important: FIRST CHARGE THE FIXTURES FOR 6-7Hours on the First
Charge before use. Plug in Power cord. Turn off Power Switch and Turn off
other switch to charge.
To Next Page